330 Gecko Lizard Card Project
#330 – Gecko Lizard Greeting Card
Paper Casting Project

Create a unique and beautiful greeting card!


                   


Materials Needed:

1 Rycraft cookie stamp or craft stamp #330 – Gecko Lizard
100% Cotton Linter (Rycraft Paper Casting Kit or Refill)
1 paper casting* of design #330 – Gecko Lizard (see Basic Paper Casting Instructions).
1 blank greeting card
3 pieces of your choice of decorative papers and colors (we used a piece of shiny metallic red textured paper approx. 3 1/4" square, a piece of metallic gold paper approx. 3" square, and a piece of metallic medium-blue textured paper cut to approx. 2 1/2" square)
Clear acrylic varnish 
Acrylic paints: metallic gold, blue to match paper, red, green
Optional: Glitter, ultra fine

Glue

*Note:  Alternately, the casting for this project may be made from clay instead of paper (see Basic Clay Casting Instructions). The choice is yours.

Instructions:

1. Let casting dry thoroughly. Then varnish the casting to seal it before painting (so wet paint won't make design disappear). Let dry. Optional: Apply a 2nd coat of varnish for more permanence. Variation: Varnish only the sleigh design and leave background area unvarnished.
2. Apply paint to sleigh design, one color at a time, letting each color dry between coats so colors don't run together. Optional: If you want to apply glitter to ribbons, bows and sleigh trim, apply glitter while gold paint is still wet. Shake off residue. Let dry. 
3.  Optional: Apply another coat of varnish to protect painted casting.
4.  Cut papers to fit your card and to then fit one over the other leaving nice borders. Glue 3 pieces together and let dry. Then glue them to the card.
5.  Glue casting to center of top paper on card.




Copyright © Rycraft, Inc 1978 - 2017.
Rycraft is a trademark of Rycraft, Inc.
All Rights Reserved, Emmett, Idaho