Custom Makenzie Magnet
Custom Design Paper Magnet
Paper Casting Project

Give a unique gift to your kids and grandkids
to celebrate their birthdays!

Custom 3" stamp we made for our granddaughter's birth.

Click here for information on creating your own CUSTOM cookie stamp!

Materials Needed:

1 Rycraft cookie stamp or craft stamp
1 sheet 100% cotton linter (Rycraft Cotton Linter)
1 paper casting*  (see Basic Paper Casting Instructions)
Clear acrylic varnish
Acrylic paints (we used light blue, medium blue, red)
1 small magnet (from craft store)

*Note:  Alternately, the casting for this project may be made from clay instead of paper (see Basic Clay Casting Instructions). The choice is yours.

1.  When paper casting is dry apply a light coat of varnish to seal the casting from moisture (so it will not swell and lose the design when paint is applied). Apply a light 2nd coat of varnish and let dry. Note:  You may also apply varnish to the back of the casting for more permanence. Variation: Apply varnish only to the design and leave the outside edge unvarnished.
2.  Apply paints to casting, one color at a time, and let dry between coats so that colors don't run together.
3.  Optional:  Apply a light coat of spray varnish to seal in paint. Let dry. Apply a 2nd coat of varnish if desired for more sturdiness. Let dry. 
4.  Glue magnet to back of casting and let dry.

Project designed and created by Maggie Montgomery. Photograph by David Montgomery.

CALL us at 1-208-398-9156
Copyright © Rycraft, Inc 1978 - 2018.
Rycraft is a trademark of Rycraft, Inc.
All Rights Reserved, Emmett, Idaho